Additional tank LRA 85L Toyota Land Cruiser VDJ76
Couldn't load pickup availability
- 100% secure payment
- Equipment Tested & Approved
- Fast & Careful Shipping
Questions about this Product?
We are here to help you.
The auxiliary tank LRA is designed for Toyota Land Cruiser VDJ76 diesel Wagon 4WD body style, from August 2012 up to compatible 2024 models. With its capacity to 85 litersIt allows you to increase the amount of fuel carried for travel, expeditions, tracks and travel in isolated areas, while retaining the original 130-liter main tank.
This tank mounts in the center of the vehicle, on the left side of the driveshaft. It uses a dual-fill point and transfers fuel to the original tank via an electric pump, with a switch/gauge. LRA-PG210 installed in the passenger compartment. Installation requires modification of the exhaust: the standard muffler must be replaced with the kit or a compatible exhaust. The spare tire is retained.
Since 1989, LONG RANGE AUTOMOTIVE designs and manufactures its tanks in Australia. Each model is developed for a specific vehicle application to optimize available volume while respecting the chassis's mechanical constraints. The tanks LRA They are made of 2mm T125CQ steel. They incorporate internal baffling to limit fuel movement, as well as an expansion chamber. Before being sold, they undergo pressure tests and several quality control checks. Tests are also carried out over dozens of kilometers of heavily degraded tracks. These tests verify the tank's resistance to vibrations, repeated twisting, impacts, and the stresses of prolonged off-road use.
Technical specifications:
- Type: Auxiliary tank
- Capacity: 85 liters
- Vehicle compatibility: Toyota Land Cruiser VDJ76
- Compatible years: From August 2012, 2013 to 2023 models, 2024 model compatible depending on configuration
- Compatible engine: Diesel V8
- Body type: Wagon
- Transmission: 4WD
- Required configuration: Vehicle with a standard 130-liter main fuel tank
- Position: Center of the vehicle, left side of the driveshaft
- Exhaust: To be modified
- Filling point: Double filling point
- Transfer pump: Electric pump included
- Gauge: Switch with gauge LRA-PG210 supplied
- Spare wheel: Retained
- Estimated assembly time: 5.5 hours
- Made in Australia
